VIRAT SPECIAL STEELS (P) LIMITED are largest way of providing Industrial Hardware products, tool steel, die steel , alloy steel of the finest quality.

Application and Procedure of Die Casting

Tool Steel 2714

Die Steel Supplier

Die Casting is a metal casting technique that’s exemplified by forcing liquefied metal below high pressure into a steel mold. Two hardened tool steel dies are used to produce the mold cavity that has been machined into shape and work correspondingly to an injection mold throughout the action. The metal hardens quickly after the injection then the half gets cast out from the mold. Die casting components are characterized by their distinct, smooth or rough-textured shells and dimensional regularity.

Basically, die casting create use of steel molds referred to as dies wherever melted metal is implemented hooked on with hugely high-pressure. Die casting is a capable technique that allows for a variety of stages of involution in producing from steel sinks to small toy cars. At a similar time, it still maintains complete accuracy to get an unstained outcome. The molding techniques matter a lot for the accuracy depends upon the technique used.
In die casting there are four steps concerned and it is a requirement that every section is completed totally before older to following section as a result of it permits perfection among the consequence. The die worker should make certain that the die casting machine is at the desired temperature. There are several possibilities for it to induce wrong if the die is cold when the melted  metal is injected as a result of it will solidify too quickly whereas not conformist to the right form. Heating will take your time according to the dimensions of the designed cast so only if the die reaches the correct temperature the casting should begin.

 

In the next step, the melted metal is injected into the die and so the metal is inserted at staggeringly high, thereby it permits the metal to adapt to the mounted figure of the die, empty of the risks of a symptom or air pockets within the merchandise.

After that, the mildew is allowed to cool down and thereby the metal gets coagulated. It differs consistently with the amount of the stage. The mildew is immersed or sprayed with cold water to ease the casting prove solid, however, this happens in some cases solely. Still the hard-hitting is maintained within the mildew specified metal does not modification properties. Finally, the die opened and also the solid forged removed.

Advantages-

1) Glorious dimensional accuracy

2) Reduces or eliminates secondary machining operations.

3) Speedy production rates.

4) It’s the power to deliver advanced shapes with high levels of tolerance.

Need Die Steel or Tool Steel?  Just click and send your requirements.

H13 Steel

H13 tool steel is a versatile chromium-molybdenum hot work steel that’s wide utilized in hot work and cold work tooling applications. The recent hardness (hot strength) of H13 resists thermal fatigue cracking that happens as the results of cyclic heating and cooling cycles in hot work tooling applications. Due to its wonderful combination of high toughness and resistance to thermal fatigue cracking (also called heat checking) H13 is used for additional hot work tooling applications than the other tool steel.

Because of its high toughness and really sensible stability in heat treatment, H13 Tool Steel is additionally utilized in a spread of cold work tooling applications. In these applications, H13 provides higher harden ability (through hardening in giant section thicknesses) and higher wear resistance than common alloy steels like 4140.

APPLICATIONS: – Inserts, cores, and cavities for die casting dies, die casting shot sleeves, hot forging dies, extrusion dies, and plastic mold cavities and parts that need high toughness and wonderful polish ability.

Supplier of H13 Steel– Virat Special Steels Pvt Ltd is the world largest H13 Die steel supplier and stockist that supplies H13 steel to all over the world.

H11 Hot Die Steel

Supplier

H11 Steel

The leading company VIRAT SPECIAL STEELS PVT. LTD. offers Hot Die Steels. It is available in various sizes, shapes and finish to suit the varieties of requirements of our valued clients. These Procurement only from trusted vendors of the market who make it by using of the best quality processing and servicing properties to manufacture quality ranges of the Hot Die Steels. We hold specialization in offering to our clients an expansive ranges of Hot Die Steels, which are acknowledged for its load bearing abilities and durability.

HOT DIE STEELS ( H-11 Steels )

H-11 steels are the most commonly used Hot Die Tool Steels. These Hot Die Steels made up of the composition of various grades like Carbon, Mangnese, Silicon, Chromium. Chromium is the major chemical composition of H-11 tool steels. It contains 4.75-5.50% Chromium. It can be air hardened in 150 mm thick sections.These steels have minimal distortion during hardening due to their balanced alloy content.These steels can be cooled using water without damage. These steels have low Carbon and alloy contents with good toughness. These steels can be deep hardened by heat treatment and air-quenching.

PROPERTIES
i. Physical Properties:
Density – 7.81 g/cm3 (in Metric).
Melting point – 1427°C (in Metric).
ii. Mechanical Properties:
Hardness, rockwell C – 56 (in Metric).
Modulus of elasticity – 207 GPa (in Metric).
Machinability (1% carbon steels) – (75.0 to 80.0)% (in Metric).
Poisson’s ratio – 0.27 to 0.30 (in Metric).
iii. Thermal Properties:
Thermal expansion (@20-100ºC/68-212ºF) – 11.9 x 10-6/ºC (in Metric).
Thermal conductivity (@100ºC/212ºF) – 42.2 W/mK (in Metric).

SIZES AVAILABLE
i. Round
ii. Flat and
iii. Square.

APPLICATIONS

The Hot Die Steels (H-11 Steels) are widely used in-
i. Forging dies
ii. Die casting
iii. Bolt dies
iv. Hot piercing punches
v. Shrink rings
vi. Moulds
vii. Metal extrusion tools for processing light metals
viii. Screws and barrels for plastic processing etc.

FEATURES:

i. Durable
ii. Fine finishing
iii. Can be water-cooled to a limited extent
iv. Unmatched thermal conductivity
v. Insusceptibility to hot cracking etc.

OUR MISSION
To provides the best services with satisfaction to our clients.

High Speed Steel

High Speed Steels are elite extraordinary steels offering high hardness at temperatures up to 500°C and high wear resistance, on account of alloying components like tungsten, molybdenum, vanadium and chromium which have the capacity to shape carbides. To enhance hot hardness, cobalt might likewise be included.

Exporter

Stockist

Virat Special Steel Stockiest of high speed steels are utilized for machine devices, for example, bores, taps devices. The properties needed here are wear resistance, hot hardness and strength which counteract breakage of cutting edges. This assurances high apparatus life and low support, and guarantees a reproducible creation process. Our elite powder metallurgical rapid steels are a claim to fame. They are the pillar in this requesting business segment. The trademark properties of all rapid steel evaluations incorporate.

we are largest supplier and stockist of high speed steel in India at maximum location like Chennai, Delhi, Mumbai, Kolkata, Punjab, Gurgaon and Ludhiana.

How to make tool for hot work tool steel?

Untitled

Hot Work Steel

Tool made of hot work tool steel are manufactured by metal cutting and non cutting shaping processes. During metal cutting, surface tensions are generated and the tension of the work piece is changed, depending on the depth of machining. In the event of extensive metal cutting, it is recommendable to perform thermal relief for annealed and quenched and tempered parts before finish machining, in order to reduce the risk of distortion or stress cracking during finish machining.  Critical machining process are processes in which the structure of steel is changed by thermal influences.

Alloy Steel

Steel Importer

Tool Steel Exporter

Alloy steel-

The type of steel that alloyed with a variety of an element other than carbon. alloy steels are widely used as forgings. They represent a range of engineering alloys capable of being heat treated to a very wide range of mechanical properties.

By far the largest tonnage of alloy steels is of the types containing 0.20 to 0.55% carbon.They are utilized as a part of different applications, for example, pipelines, auto parts producing, electric engines, axles and shafts of force transformers, generators, flying machine motors mounts, landing apparatuses, wear safe coatings, assembling force gadgets segments, hot zones of heaters, terminals fabricating, sun oriented cell coatings, magnets, radiation shields, fashioning passes on, oil and petrochemical commercial ventures, creation of ointments and smoke suppressants.

If you setup your forging company and you need alloy steel bar ask for a quote for us, Virat Special Steel are Alloy steel Stockist, Importer, Supplier, Exporter and Manufacturer.

O1 Tool Steel

O1 tool Steel is a mute alloy cold function tool elite that am close to being oil-quenched in tumble treatment. O1 contains close to the ground amounts of manganese, tungsten, and chromium, giving O1 proficient toughness for serene tool & cease uses. O1 has in a brown raw material hardening properties by the entire of in a class all by itself grain structure by all of unusual toughness. O1 has well-off response to light treatment by the whole of small dimensional changes. Sizes everywhere approximately 2 inches on top of each other or everywhere may babble a disintegrate hardness in the interior.

Uses- blanking, forming, and trim dies, punches, bolster dies, knock-out pins, thread roll dies, bending dies, plastic mold dies, shims, cams, machine parts

Cold Work Steel

O1 Cold Work Steel

Virat Special Steel is steel suppliers , steel exporter, steel importer and stockiest of all type of steel bar in flat, square and round bar.

Die Steel Din 1.2714

DB6 Die Block is an all around, oil-hardening tool comfort that is characterized by absolutely good toughness. DB6 or din 2714 or L6 tool let the sun shine in is all right already for the handle as tools, dies, and apparatus parts, which oblige a good hoard of inflexibility and toughness. The relatively an arm and a leg nickel easygoing results in an alloy mutually greater violence toughness compared to the other hack oil-hardening grades.

VIRAT SPECIAL STEELS PVT. LTD. provide die blocks as per customer necessities.

Die block/steel are made of high-grade hard steel having high density. created with advanced technology and as per the quality dimensions, these steel dies will be simply & utterly cut within the desired form forming a spread of product and elements.

APPLICATIONS: Punches and dies, apathetic forming tools, and coining dies, trimmer dies, spindles, clutch pins

USA

L6 Tool Steel Exporter

Virat Special Steel is steel stockist and supplier of tool steel, die block, alloy steel and many more.