Virat Special Steels supplies hot work tool steel for aluminium extrusion tooling to extruders, die makers and tool rooms, in H13 (DIN 1.2344) and ESR-grade H13 flat, square and round bars, with DB6 (DIN 1.2714) for tooling holders. Material is cut to size and backed by technical guidance. We are the authorised NLMK Verona distributor in India, with 3,500+ tons of stock across 35+ grades, band saw cutting up to 2500 × 1100 mm, a machining shop, and in-house spectro, UT and hardness testing.
Aluminium extrusion forces a heated billet through a shaped die to produce profiles with specific cross-sections, complex shapes and good surface finishes. The tooling set usually includes the die, backer and bolster, container and liner, stem and dummy block, and a mandrel for hollow profiles. Every part sees heat, pressure and wear on each press cycle.
H13 (DIN 1.2344) is the usual choice for aluminium extrusion dies and tooling. For demanding dies and long production runs, ESR-grade H13 gives cleaner, more uniform steel. DB6 (DIN 1.2714) is used for tooling holders where toughness matters most. We stock all three.
| Type | H13 / DIN 1.2344 | ESR H13 / DIN 1.2344 | DB6 / DIN 1.2714 |
|---|---|---|---|
| Standard names | X40CrMoV5-1, AISI H13, SKD61, AFNOR Z40CDV5 | Same grade, electro-slag remelted | 55NiCrMoV7, AISI L6, AFNOR 55NCDV7 |
| Steel type | About 5% chromium, with molybdenum and vanadium | As H13, remelted for higher cleanliness | Chromium-nickel-molybdenum-vanadium |
| Why extruders choose it | Good hot strength, tempering resistance and resistance to thermal fatigue and heat checking | Higher cleanliness and more uniform properties through the block | High toughness and good through-hardening; resists shock loading |
| Typical extrusion use | Extrusion dies, mandrels, dummy blocks, containers and liners | Demanding dies, such as complex profiles and long production runs | Tooling holders and similar supporting parts |
| Other uses | Die casting dies, forging dies | Die casting dies, forging press dies | Hammer forging dies, hot shear blades |
Look at the failed die first. The pattern of damage points to the cause.
Behind many of these failures are the wrong grade, steel with inclusions or uneven properties, poor heat treatment, inadequate preheating, sudden cooling or weak maintenance.
Aluminium extruders, die makers and toolrooms are our core buyers for extrusion steel. We also supply die casting, forging, automotive, railway, heavy engineering, mining, power generation and oil and gas customers.
| Product | Forms | Typical extrusion use |
|---|---|---|
| H13 / DIN 1.2344 | Flat, square, round | Extrusion dies, mandrels, dummy blocks, containers and liners |
| H13 ESR | Flat, square, round | Demanding dies and long production runs |
| DB6 / DIN 1.2714 | Flat, square, round | Tooling holders |
Jindal Aluminium Limited, headquartered in Bengaluru, manufactures aluminium extrusions and flat rolled products. The company was founded in 1968 by Dr Sitaram Jindal.
Hindalco Industries Limited is the metals flagship company of the Aditya Birla Group, with aluminium and copper businesses. Its aluminium business runs from mining and smelting through to rolling, extrusions and foils.
We Keep The Materials From India, Japan, South Korea, Italy, Germany, France, Brazil.