HXM 19 Steel is a high-hardness, pre-hardened mould and tool steel used in industrial applications requiring hardness, wear resistance, toughness and good machinability. It is suitable for mould-making and precision tooling applications where durability, surface finish and dimensional stability are important. With its specified hardness and mechanical properties, HXM 19 steel can be considered for plastic injection moulds, industrial tooling, extrusion dies and other demanding mould applications, subject to the manufacturer's technical specifications.
The chemical composition of HXM 19 steel determines its hardness, strength, toughness, machinability and wear resistance. The exact composition must be confirmed using the applicable HXM 19 material specification or mill test certificate. Values are intentionally not assumed here because the grade specification has not been provided.
| Chemical Element | Carbon (C) | Chromium (Cr) | Manganese (Mn) | Molybdenum (Mo) | Nickel (Ni) | Silicon (Si) | Sulphur (S) | Phosphorus (P) |
|---|---|---|---|---|---|---|---|---|
| Composition (%) | Confirm specification | Confirm specification | Confirm specification | Confirm specification | Confirm specification | Confirm specification | Controlled | Controlled |
HXM 19 steel is selected for applications requiring a balance of hardness, strength, toughness and machinability. Its actual mechanical properties depend on the supplied condition, manufacturing process and applicable technical specification.
| Property | Hardness | Tensile Strength | Yield Strength | Density | Modulus of Elasticity | Toughness | Wear Resistance |
|---|---|---|---|---|---|---|---|
| Indicative Value | Confirm the specified range with the supplier | Confirm with material specification | Confirm with material specification | Confirm with material specification | Confirm with material specification | Depends on the grade specification and supplied condition | Depends on hardness, composition and operating conditions |
Contact Virat Special Steels for HXM 19 steel supply, availability and technical assistance.
Email Us → Call 98140-21775 WhatsAppHeat treatment can influence the hardness, toughness, dimensional stability and service life of HXM 19 steel. Annealing, hardening and tempering procedures must be selected according to the verified grade specification and recommendations of a qualified heat-treatment specialist.
Incorrect heat treatment may cause cracking, distortion or unsuitable mechanical properties. Always confirm the recommended processing temperatures and cooling methods before treatment.
HXM 19 steel can be machined according to its supplied hardness and material condition. Appropriate cutting tools, machining parameters and finishing techniques help achieve the required dimensional accuracy and surface quality. Its suitability for high-quality mould polishing depends on material cleanliness, microstructure, heat treatment and the required surface finish.
HXM 19 steel can be considered for the following applications, subject to grade verification and operating requirements.
Material characteristics depend on the specified grade, supplied condition, machining and heat treatment.
Virat Special Steels supplies HXM 19 steel in flat bars, square bars and round bars, subject to stock availability and required dimensions. Our team can assist with size selection, material availability and technical information for mould-making and industrial tooling applications.
HXM 19 steel is available in the following forms, subject to availability:
For information about HXM 19 steel availability, specifications and supply, contact our team.
Find answers to common questions about HXM 19 steel, its applications, properties and availability.
HXM 19 steel is a mould and tool steel grade used for applications requiring suitable hardness, wear resistance, toughness and machinability.
It may be used for plastic injection moulds, precision tooling, selected extrusion tooling and industrial mould components, depending on the verified material properties.
The hardness depends on the applicable grade specification and supplied condition. Contact the supplier to confirm the available hardness and supporting material documentation.
HXM 19 steel can be considered for plastic mould applications where its verified hardness, machinability, polishing characteristics and toughness meet the requirements.
Virat Special Steels supplies HXM 19 steel in flat, square and round bars, subject to availability and customer requirements.
Contact Virat Special Steels at info@viratsteels.com or call 98140-21775 to enquire about stock, dimensions and technical specifications.
