Virat Special Steels
tuv

Die and Tool Steel for the Oil and Gas Industry in India

Oil and gas equipment works under heavy loads, pressure and wear, and is often built to strict customer specifications, so the steel grade and its test documents matter as much as the price.

  • Since 1957 Supplying the forging industry
  • 35+ Grades
  • 1800+ Customers
  • 3,500+ tons Stock capacity across our yards

Contact Virat Special Steels

Virat Special Steels supplies Die steel and tool steel to manufacturers, forging shops and machine shops that make parts for oil and gas equipment. We supply the steel, to the grade and specification you name, not finished equipment. We hold stock in Ludhiana and Gurugram, with band saw cutting up to 2500 × 1100 mm, a machining shop, and in-house spectro, UT and hardness testing.


Which Steel for Which Oil and Gas Job

Typical need Grades we stock Notes
Shafts, pins, couplings and other heavily loaded machined parts 40NiCrMo84 (EN24) Through-hardening Die steel, normally heat treated by the buyer. Condition and hardness
Gears and case-hardened components 16MnCr5, 20MnCr5, 20NiCrMo5 (EN353) Case-hardening Die steels
Dies for forging valve, flange and similar components DB6 / DIN 1.2714, H13 / DIN 1.2344, H11 / DIN 1.2343 Hot work tool steels. See our forging die steel page.
A grade or standard not listed here Ask us Send the specification and we will tell you what we can supply.
Oil and gas parts are usually specified by the end user, so these are starting points. The drawing and specification decide the grade.

Specifications and Documents

Oilfield and pipeline parts are often built to API, NACE or customer-specific requirements. Send us the specification, the heat-treatment condition and the reports you need when you enquire. We confirm what we can supply and which documents are available for your grade and lot. We do not claim compliance before we have seen the requirement.

Two things to state clearly in your RFQ: whether the part is for sour (H2S) or corrosive service, which needs tighter material and hardness control, and whether it needs UT or other testing. Die steels such as EN24 are not corrosion-resistant, so corrosive duty may need a different material.


Services around the steel

  • Ready stock Material is held in Ludhiana and Gurugram for off-the-shelf supply
  • Cut to size Band saw cutting to your block or bar length, so you pay for steel you will use.
  • Machining Squaring and other value-adding work in our machining shop
  • Testing Chemical analysis, UT and hardness checks in-house
  • Technical advice Help with grade choice and heat treatment questions.

How to order

  • Send us the grade, size, quantity and delivery location
  • Tell us the delivery condition and the test certificates you need
  • We reply with stock status, delivery time and a quotation
  • We cut, machine and dispatch to your plant

About Virat Special Steels

We began in 1957 as Dhingra Enterprises, supplying tool and die steel to India’s forging and casting industry. Today we stock tool, die and Die steels, import from mills in Europe, Japan, South Korea and Brazil, and handle cutting, machining and testing at our own facility.

Questions Oil and Gas Buyers Ask

It depends on the part, its loading and the environment. Heavily loaded shafts, pins and couplings are often made from through-hardening Die steels such as 40NiCrMo84 (EN24). Parts for corrosive or sour service are specified more tightly. Always follow your drawing and the end-user specification.
EN24 is the common name for 40NiCrMo84 in our range. AISI 4340 is commonly cross-referenced to it, but limits differ between standards, so confirm on the mill certificate.
Tell us the specification at the enquiry stage. We confirm what we can supply and which documents are available for your grade and lot. We do not claim compliance before we have seen the requirement.
Yes. Forging shops making valve, flange and similar components use hot work tool steels for their dies. We stock DB6 (DIN 1.2714), H13 (DIN 1.2344) and H11 (DIN 1.2343) for this.
Yes. Our band saws cut up to 2500 × 1100 mm, and our machining shop can square and finish blocks. Send us the size you need and we will confirm what is in stock and what can be cut.
We have an in-house chemical and spectro lab, a UT testing machine and a hardness tester. Tell us at the enquiry stage which reports and certificates you need, and we will confirm what can be issued for your grade and lot.
Stock is held in Ludhiana and Gurugram. We supply across India, including Ludhiana, Faridabad, Manesar, Gurugram, Pune, Nashik, Chennai and Coimbatore. Delivery time depends on grade, size and stock, and we confirm it with the quotation.
Call +91 98140 21775, email info@viratsteels.com, message us on WhatsApp or use the enquiry form. Give us the grade, size, quantity, delivery location, delivery condition, specification and the testing documents you need. We reply with stock status and a quotation.

Stocking Partners

We Keep The Materials From India, Japan, South Korea, Italy, Germany, France, Brazil.

india     japan     south-korea     italy     germany     france     brazil
Inquire Now Product

Products

 

  • Corporate Office: C-545, Sector-37, Pace City - II, Gurgaon 122001 (Haryana) India
  • UNIT-I: C-146, Focal Point, Phase - V, Ludhiana 141010 (Punjab) India
  • UNIT-II: NH-1, G.T. Road, Opp. Sarita Forging, Rajgarh, LDH (Punjab) India

 

payment