Virat Special Steels
tuv

Tool Steel for the Glass Industry in India

Glass tooling works against red-hot glass, repeated heating and cooling, and wear, and every flaw in the tool shows on the product, so the steel you choose decides tool life, surface quality and downtime.

  • Since 1957 Supplying the forging industry
  • 35+ Grades
  • 1800+ Customers
  • 3,500+ tons Stock capacity across our yards

Contact Virat Special Steels

Virat Special Steels supplies hot work and other tool steels to glass manufacturers, tool makers and machine shops for glass-industry tooling and equipment parts. We hold stock in Ludhiana and Gurugram, with band saw cutting up to 2500 × 1100 mm, a machining shop, and in-house spectro, UT and hardness testing.


Which Steel for Which Glass-Industry Tool

Tool or part Grades we stock Why
Plungers, press and forming tools that see heat and wear H13 / DIN 1.2344, H11 / DIN 1.2343 Hot work steels chosen for resistance to heat checking and softening
Holders, supports and machine parts near the hot zone DB6 / DIN 1.2714, H13 DB6 for toughness where impact or shock matters, H13 where parts run hotter
Shear blades and cutting tools DB6 for hot shear blades; D2, D3 or M2 for cold cutting tools Depends on whether the blade works hot or cold, and on the wear it sees
Moulds that need stainless or specialist materials Ask us See the note below.
Working hardness and heat treatment. Confirm with your tool designer.

What We Do and Do Not Supply

Glass moulds for containers, tableware or optical ware are often made from cast iron, stainless mould steel or specialist alloys, chosen for oxidation resistance, corrosion resistance and surface finish. Our core range is hot work, cold work, plastic mould and high speed tool steel. If your tool needs one of those other materials, tell us the requirement and we will say plainly whether we can supply it. We would rather tell you that early than quote the wrong steel.


Services around the steel

  • Ready stock Material is held in Ludhiana and Gurugram for off-the-shelf supply
  • Cut to size Band saw cutting to your block or bar length, so you pay for steel you will use.
  • Machining Squaring and other value-adding work in our machining shop
  • Testing Chemical analysis, UT and hardness checks in-house
  • Technical advice Help with grade choice and heat treatment questions.

How to order

  • Send us the grade, size, quantity and delivery location
  • Tell us the delivery condition and the test certificates you need
  • We reply with stock status, delivery time and a quotation
  • We cut, machine and dispatch to your plant

About Virat Special Steels

We began in 1957 as Dhingra Enterprises, supplying tool and die steel to India’s forging and casting industry. Today we stock tool, die and Die steels, import from mills in Europe, Japan, South Korea and Brazil, and handle cutting, machining and testing at our own facility.

Questions Glass Industry Buyers Ask

It depends on the tool. Forming and pressing tools that see heat and wear are often made from hot work tool steels such as H13 (DIN 1.2344) and H11 (DIN 1.2343), and DB6 (DIN 1.2714) is used for holders and supporting parts. Some moulds use other materials, so follow your tool designer’s specification.
H13 is used for some glass-industry tools. Moulds that need very high oxidation resistance or a very high polish are often made from stainless mould steels or specialist alloys instead. Send us your requirement and we will tell you plainly whether we can supply it.
Both are 5% chromium hot work steels. H11 has less vanadium and is slightly tougher, while H13 is the more widely used grade. Choose by tool design, operating temperature and how the tool fails.
Yes. Our band saws cut up to 2500 × 1100 mm, and our machining shop can square and finish blocks. Send us the size you need and we will confirm what is in stock and what can be cut.
We have an in-house chemical and spectro lab, a UT testing machine and a hardness tester. Tell us at the enquiry stage which reports and certificates you need, and we will confirm what can be issued for your grade and lot.
Stock is held in Ludhiana and Gurugram. We supply across India, including Ludhiana, Faridabad, Manesar, Gurugram, Pune, Nashik, Chennai and Coimbatore. Delivery time depends on grade, size and stock, and we confirm it with the quotation.
Call +91 98140 21775, email info@viratsteels.com, message us on WhatsApp or use the enquiry form. Give us the grade, size, quantity, delivery location, delivery condition, the tool or part it is for, and the testing documents you need. We reply with stock status and a quotation

Stocking Partners

We Keep The Materials From India, Japan, South Korea, Italy, Germany, France, Brazil.

india     japan     south-korea     italy     germany     france     brazil
Inquire Now Product

Products

 

  • Corporate Office: C-545, Sector-37, Pace City - II, Gurgaon 122001 (Haryana) India
  • UNIT-I: C-146, Focal Point, Phase - V, Ludhiana 141010 (Punjab) India
  • UNIT-II: NH-1, G.T. Road, Opp. Sarita Forging, Rajgarh, LDH (Punjab) India

 

payment