Virat Special Steels
tuv

Plastic Mould Steel for the Plastic Mould Industry in India

Plastic injection moulds are judged on how easily they machine, how well they polish and how long they hold their size, so the mould steel you buy decides both the mould build and its production life.

  • Since 1957 Supplying the forging industry
  • 35+ Grades
  • 1800+ Customers
  • 3,500+ tons Stock capacity across our yards

Contact Virat Special Steels

Virat Special Steels supplies plastic mould steel to mould makers, toolrooms and plastic component manufacturers, in P20 (DIN 1.2311) and P20+Ni (DIN 1.2738). These are pre-hardened grades used for injection mould bases, cavities and cores, and for blow, extrusion and compression tooling. Material is cut to size and backed by technical guidance. We hold stock in Ludhiana and Gurugram, with band saw cutting up to 2500 × 1100 mm, a machining shop, and in-house spectro, UT and hardness testing.


P20 or P20+Ni: Which Mould Steel to Choose

Type P20 / DIN 1.2311 P20+Ni / DIN 1.2738
Standard names 40CrMnMo7, AISI P20 40CrMnNiMo8-6-4, AISI P20+Ni
Steel type Pre-hardened chromium-manganese-molybdenum mould steel Same family with added nickel
Why mould makers choose it Good machinability, widely used for general-purpose moulds Better hardness uniformity through thick blocks, good polishability
Typical use Small and medium injection moulds, mould bases, cavities Large injection and blow moulds, thick blocks
Watch out for Less uniform hardness in very thick blocks Not corrosion-resistant
Supply condition and hardness Pre-hardened Pre-hardened

How to decide

Block size. The bigger and thicker the block, the more nickel helps keep hardness even from surface to core. Finish. Both polish well for general mould work, but very high or optical polish may call for a different steel. Resin. Neither grade resists corrosion, so tell us if you mould PVC or other corrosive resins. Production run. For very long runs or abrasive filled materials, ask us whether a harder or more wear-resistant mould steel suits your tool better.

These are starting points, not final answers. Confirm hardness with the mill datasheet and your mould designer.


Services Around the Steel

  • Ready stock Material held in Ludhiana and Gurugram for off-the-shelf supply.
  • Cut to size Band saw cutting to your block or bar length, so you pay for steel you will use.
  • Machining Squaring and other value-adding work in our machining shop.
  • Testing Chemical analysis, UT and hardness checks in-house.
  • Technical advice Help choosing between P20 and P20+Ni, and with machining questions.

How to order

  • Send us the grade, size, quantity and delivery location.
  • Tell us the delivery condition and the test certificates you need.
  • We reply with stock status, delivery time and a quotation.
  • We cut, machine and dispatch to your plant.

Plastic Mould Industry Customers

Samvardhana Motherson International Limited (Motherson)

Samvardhana Motherson International Limited, known as Motherson, is an automotive components manufacturer based in Noida.

  • Moulded plastic parts and modules such as dashboards, door trims and bumpers
  • Injection moulding tools
  • Wiring harnesses and rearview mirrors

Lumax Group

The Lumax Group, part of the D.K. Jain Group, supplies automotive components in India through companies including Lumax Industries Limited and Lumax Auto Technologies Limited.

  • Automotive lighting (Lumax Industries)
  • Integrated plastic modules and other components (Lumax Auto Technologies)
  • Components for two, three and four-wheeler makers

Questions Plastic Mould Buyers Ask

Most general-purpose plastic injection moulds are made from pre-hardened mould steels, mainly P20 (DIN 1.2311) and P20+Ni (DIN 1.2738). They are chosen for machinability, polishability and toughness. The right grade depends on block size, surface finish, resin and production volume.
P20 (DIN 1.2311, 40CrMnMo7) is the common general-purpose grade. P20+Ni (DIN 1.2738, 40CrMnNiMo8-6-4) adds nickel, which is generally chosen for better hardness uniformity through thick blocks, so it suits large moulds. Limits differ slightly between standards, so confirm on the mill certificate.
P20 and P20+Ni are normally supplied pre-hardened (quenched and tempered), so the mould can be machined without a separate hardening step. Hardness depends on the mill and lot, so ask us for the mill datasheet of the material you are buying.
P20 and P20+Ni are not corrosion-resistant steels. Corrosive resins such as PVC, optical-grade polish or very abrasive filled materials may need a different mould steel. Tell us your resin and finish requirement and we will tell you what we can supply.
Yes. Our band saws cut up to 2500 × 1100 mm, and our machining shop can square and finish blocks. Send us the size you need and we will confirm what is in stock and what can be cut.
We have an in-house chemical and spectro lab, a UT testing machine and a hardness tester. Tell us at the enquiry stage which reports and certificates you need, and we will confirm what can be issued for your grade and lot.
Stock is held in Ludhiana and Gurugram. We supply across India, including Ludhiana, Faridabad, Manesar, Gurugram, Pune, Chennai and Coimbatore. Delivery time depends on grade, size and stock, and we confirm it with the quotation.
Call +91 98140 21775, email info@viratsteels.com, message us on WhatsApp or use the enquiry form. Give us the grade, size, quantity, delivery location, delivery condition and the testing documents you need. We reply with stock status and a quotation.

Stocking Partners

We Keep The Materials From India, Japan, South Korea, Italy, Germany, France, Brazil.

india     japan     south-korea     italy     germany     france     brazil
Inquire Now Product

Products

 

  • Corporate Office: C-545, Sector-37, Pace City - II, Gurgaon 122001 (Haryana) India
  • UNIT-I: C-146, Focal Point, Phase - V, Ludhiana 141010 (Punjab) India
  • UNIT-II: NH-1, G.T. Road, Opp. Sarita Forging, Rajgarh, LDH (Punjab) India

 

payment