Virat Special Steels
tuv

Tool and Die Steel for the Automotive Industry in India

Automotive parts are made in high volumes with forging, die casting, stamping and moulding tools, so the tool steel you choose decides die life, rejection rates and press downtime.

  • Since 1957 Supplying the forging industry
  • 35+ Grades
  • 1800+ Customers
  • 3,500+ tons Stock capacity across our yards

Contact Virat Special Steels

Virat Special Steels supplies tool and die steel to automotive component manufacturers, die makers and toolrooms: hot work grades for forging and die casting dies, cold work grades for stamping and cold forging tools, plastic mould steels, and high speed steels. Material is cut to size and backed by technical guidance. We hold stock in Ludhiana and Gurugram, with band saw cutting up to 2500 × 1100 mm, a machining shop, and in-house spectro, UT and hardness testing.


Which Tool Steel for Which Automotive Tool


Automotive Tooling Usual Grades Why
Hot forging dies DB6 / DIN 1.2714, H13 / DIN 1.2344, H11 / DIN 1.2343 DB6 for impact toughness on hammer dies and large blocks. H13 or H11 where dies run hotter.
Aluminium die casting dies H13, H11 Resistance to heat checking from repeated heating and cooling
Cold forging, blanking and stamping tools D2,D3,M2 where needed Wear resistance for cold tooling
Plastic injection moulds P20, P20+Ni Pre-hardened mould steels for bases and cavities.
Cutting and machining tools High speed steels: M2, M35, M42, T1 Cutting edge performance in tools such as drills and taps.
These are starting points, not final answers. Die design, machine, work material and production volume all change the choice. Confirm hardness and heat treatment with your die designer and the mill datasheet.

About Virat Special Steels

We began in 1957 as Dhingra Enterprises, supplying tool and die steel to India’s forging and casting industry. Today we import and stock tool, die and alloy steels from mills in Europe, Japan, South Korea and Brazil, and handle cutting, machining and testing at our own facility, so one team can take your enquiry from quotation to dispatch.


Services around the steel

  • Ready stock Material is held in Ludhiana and Gurugram for off-the-shelf supply
  • Cut to size Band saw cutting to your block or bar length, so you pay for steel you will use.
  • Machining Squaring and other value-adding work in our machining shop
  • Testing Chemical analysis, UT and hardness checks in-house
  • Technical advice Help with grade choice, ESR versus standard, hardness and heat treatment questions

How to order

  • Send us the grade, size, quantity and delivery location
  • Tell us the delivery condition and the test certificates you need
  • We reply with stock status, delivery time and a quotation
  • We cut, machine and dispatch to your plant

Automotive Customers

Hero MotoCorp Limited

Hero MotoCorp Limited, headquartered in New Delhi, manufactures motorcycles, scooters and electric two-wheelers.

  • Motorcycles, scooters and electric two-wheelers
  • Plants at Dharuhera, Gurugram, Neemrana, Haridwar, Halol and Chittoor

International Tractors Limited (Sonalika)

International Tractors Limited makes Sonalika tractors and is headquartered in Hoshiarpur, Punjab.

  • Tractors and farm equipment
  • Manufacturing at Hoshiarpur, Punjab
  • Supplies Indian and export markets

Questions Automotive Buyers Ask

Hot forging dies are made from hot work tool steel. DB6 (DIN 1.2714) is the usual starting point for hammer dies and large blocks, and H13 (DIN 1.2344) or H11 (DIN 1.2343) for press dies, inserts and hotter die surfaces. Final choice depends on the machine, die size and forging temperature.
H13 is the grade most often asked for, with H11 as a close alternative. Both are 5% chromium hot-work steels chosen to resist heat checking. Tell us the die size and the part you cast, and we will go through the options with you.
These tools usually use cold work steels such as D2 and D3, or high speed steels such as M2 where the tool needs it. Hot work grades are for hot dies, not cold tooling.
Pre-hardened plastic mould steels such as P20 and P20+Ni are common choices for mould bases and cavities. Tell us the finish and texture you need, because that affects the choice.
Yes. Our band saws cut up to 2500 × 1100 mm, and our machining shop can square and finish blocks. Send us the size you need and we will confirm what is in stock and what can be cut.
We have an in-house chemical and spectro lab, a UT testing machine and a hardness tester. Tell us at the enquiry stage which reports and certificates you need, and we will confirm what can be issued for your grade and lot.
Stock is held in Ludhiana and Gurugram. We supply automotive clusters across India, including Ludhiana, Faridabad, Manesar, Gurugram, Pune, Nashik, Chennai and Coimbatore. Delivery time depends on grade, size and stock, and we confirm it with the quotation.
Call +91 98140 21775, email info@viratsteels.com, message us on WhatsApp or use the enquiry form. Give us the grade, size, quantity, delivery location, delivery condition and the testing documents you need. We reply with stock status and a quotation.

Stocking Partners

We Keep The Materials From India, Japan, South Korea, Italy, Germany, France, Brazil.

india     japan     south-korea     italy     germany     france     brazil
Inquire Now Product

Products

 

  • Corporate Office: C-545, Sector-37, Pace City - II, Gurgaon 122001 (Haryana) India
  • UNIT-I: C-146, Focal Point, Phase - V, Ludhiana 141010 (Punjab) India
  • UNIT-II: NH-1, G.T. Road, Opp. Sarita Forging, Rajgarh, LDH (Punjab) India

 

payment